Home > Joe's Online Catalog > PLUMBING & ELECTRICAL > KITCHEN & BATH > SHOWER & BATH REPAIR > TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 4
Oatey 43561 Snap-In Floor Drain Oatey 42042 Tile Rings GASKET TUB DRAIN CARTRIDGE
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4".
Screw-Tite 42358 Replacement Strainer Oatey 43569 Snap-In Floor Drain Oatey 43565 Snap-In Floor Drain
For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
COVER DRAIN CLIP SHOWER3-3/8IN STRAINER TUB SNAP 2IN CHROME  Plumb Pak PP826-64 Strainer Dome Cover
Designed to fit 3-3/8" shower drains. Steel construction, 2" diameter. Grid-style. Strainer dome cover with screw.
PLATE OVERFLOW 1-HOLE CHROME  Plumb Pak PP22612 Face Plate Screw STRAINER SHOWER 3-3/8IN CHROME
Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. Chrome plated face plate screws. Steel construction, use with 3-1/8" drains. Screws not included.
DRAIN SHOWER STALL 2 FIP      Plumb Pak PP825-50 Shower Drain Grid Oatey 42787 Shower Drain
Female threaded outlet, stainless steel grid, 3-1/2" flange diameter. 3-5/16" O.D. 6.88" h x 4-3/4" w. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
B & K 133-106 Shower Drain World Wide Sourcing 24354 Bath Drain Trip Levers BASKET SHOWER HAIR CATCHER
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Zinc body. Screws included. Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain
Plumb Pak PP606-23 Clevis Plunger Linkage Assembly Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate DRAIN STOPPER RAPIDFIT CHROME
For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated Plastic. Touch-toe design,
Oatey 101 PNC Shower Drain Oatey 42097 101 PS Shower Drain Oatey 42086 101 PS Shower Drain
Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Plumb Pak PP863-50 Replacement Tip Toe Cartridge Plumb Pak PP825-51 Shower Drain Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate
Threaded shaft. Fits 2" outlet. Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated
Oatey Snap-Tite Round Drain Strainer Oatey 42093 101 PS Shower Drain Plumb Pak PP826-1 2-Hole Trip Lever Style Tub Face Plate
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Trip lever for drain control. Includes screws.
   
 
1 2 3 4